Installation

Installation Instructions for your Cordaway Blind Safety Device

To ensure proper functioning of your Cordaway safety unit, please follow the instructions below during installation.

Tools Required

Cordaway Installation Tools

• Drill
• Level
• Pencil
• Phillip's head screwdriver
• Tape measure


 Cordaway Installtion Step 1

STEP 1

Locate base plate on side of window with blind cords.


Bottom of the base plate should be mounted 1600mm above floor level to meet ACCC standards.

accc.gov.au/publications/corded-internal-window-coverings

Cordaway Installation Step 1

STEP 2

Using screws supplied, fix off base plate to timber architrave in a level position.

Nb. Base plate can be used either way up.

If you have to fix the base plate to a different material we recommend you use a tradesman/handyman.

Cordaway Installation Step 3

STEP 3

Guide the cord to the base plate on the locating lug at the top and wind the cord on.

 

 

Cordaway Installation Step 4

STEP 4

Ensure nods hang inside, not below the unit.

Cordaway Installation Step 5

STEP 5

Clip your Cordaway cover plate on.

Cordaway Installation Step 6

STEP 6

To remove the cover plate, pull from either the top or bottom.